表麵改性效果顏料與指甲油組合物
ECKART GmbH生產的METALURE A-41010AE的重量為13%，科萊恩生產的Hostaphat CS 120的重量為0.2%。
本發明生產的指甲油組合物
透明塗層的生產:
在適當的攪拌容器中，可製得重量比為70%的粘結劑溶液絮凝劑。為此,70克的粘合劑Kristalex F100烴樹脂(來自伊士曼)被添加到一個初始的30 g乙酸丁酯98/100而攪拌和冷卻(12°c)在 Dispermat CNf2分散機(來自Getzmann GmbH)完成,然後3000 - 4000轉/分鐘混合攪拌30分鐘。
在另一個合適的攪拌容器中，以60%重量的粘合劑溶液5140進行攪拌。為此,60克的粘合劑Kristalex 5140烴樹脂(來自伊士曼)被添加到一個初始的40 g的醋酸丁酯98/100而攪拌和冷卻(12°c) 在Dispermat CNf2分散機(來自Getzmann GmbH)完成,然後3000 - 4000轉/分鐘混合攪拌30分鐘。
上述粘合劑溶液的非揮發性含量(粘合劑固體含量)根據DIN EN ISO 3251:2008進行測定。
Ilb本發明生產指甲油組合物
為了生產示例32到示例35的本發明指甲油組合物，根據下麵表9，表10和表11，在600 rpm/min攪拌下，在初始電荷為4 g的表麵化效果顏料的基礎上添加96 g的透明塗層。
本發明的指甲油組合物例32至43的外觀外觀是在將其應用於合成指甲並隨後用例5中每種情況下使用的表麵修飾效果色素幹燥後確定的。在根據IIa生產的透明塗層中，每種情況下使用的表麵修飾效果顏料都表現出明顯的葉麵特征，在某些情況下還表現出明顯的鏡麵光澤。
實驗發現，關於應用特征,發明的指甲油成分與粘結劑固體含量60%的體重,根據實驗確定的總重量,由於他們的高粘度,比發明的指甲油應用粘結劑固體含量按重量30%或40%的重量適用性差,在每種情況下基於實驗的總重量。
VMA Dispermat分散設備
SURFACE-MODIFIED EFFECT PIGMENT AND NAIL VARNISH COMPOSITION
Comparative Example 16
Mixture of 13% by weight of METALURE A-41010AE, from ECKART GmbH and 0.2% by weight of Hostaphat CS 120, from Clariant.
II Production of the Nail Varnish Compositions of the Invention
IIa Production of the Clearcoat:
In a suitable stirred vessel, a 70% by weight binder solution FlOO was produced. For this purpose, 70 g of the binder Kristalex F100 Hydrocarbon Resin (from Eastman) were added to an initial charge of 30 g of butyl acetate 98/100 while stirring and cooling (12° C.) with the Dispermat CNf2 dissolver (from Getzmann GmbH), and then the mixture was stirred at 3000 to 4000 rpm/min for a further 30 minutes.
In a second suitable stirred vessel, a 60% by weight binder solution 5140 was produced. For this purpose, 60 g of the binder Kristalex 5140 Hydrocarbon Resin (from Eastman) were added to an initial charge of 40 g of butyl acetate 98/100 while stirring and cooling (12° C.) with the Dispermat CNf2 dissolver (from Getzmann GmbH， and then the mixture was stirred at 3000 to 4000 rpm/min for a further 30 minutes.
The nonvolatile content (binder solids content) of the above-described binder solutions was determined according to DIN EN ISO 3251:2008.
Ilb Production of the Nail Varnish Compositions of the Invention
For production of the inventive nail varnish compositions of examples 32 to 35, 96 g of the clearcoat were added to an initial charge of 4 g of the respective surfacemodified effect pigment according to tables 9, 10 and 11 below with stirring at 600 rpm/min.
The visual appearance of the inventive nail varnish compositions of examples 32 to 43 was determined after application to a synthetic fingernail and subsequent drying by the surface-modified effect pigment from example 5 used in each case. The surface-modified effect pigment used in each case, in the clearcoat produced according to IIa, showed marked leafing characteristics and in some cases marked specular gloss. With regard to application characteristics, it was found that the nail varnish compositions of the invention with a binder solids content of 60% by weight, based on the total weight of the clearcoat, owing to their high viscosity, have poorer applicability than the nail varnish applications of the invention with a binder solids content of 30% by weight or 40% by weight, based in each case on the total weight of the clearcoat。
